Problem: zip-plugin has problems with special characters
(user202729)
Solution: escape '*?[\' on Unix and handle those chars
a bit differently on MS-Windows, add a test, check
before overwriting files
runtime(zip): small fixes for zip plugin
This does the following:
- verify the unzip plugin is executable when loading the autoload plugin
- handle extracting file names with '[*?\' in its name correctly by
escaping those characters for the unzip command (and handle those
characters a bit differently on MS-Windows, since the quoting is different)
- verify, that the extract plugin is not overwriting a file (could cause
a hang, because unzip asking for confirmation)
- add a test zip file which contains those special file names
fixes: #15505closes: #15519
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: Analyzing failed screendumps is hard
Solution: Facilitate the viewing of rendered screendumps under src/
add some documentation on how to use the viewdumps.vim
script (Aliaksei Budavei)
With the submitted "viewdumps.vim" script, a few manual
steps in typical workflows (see below) can be automated.
The updated "README.txt" contains additional information.
============================================================
Reviewing LOCAL failed screendump tests can be arranged as
follows:
1) Run tests and generate screendumps:
------------------------------------------------------------
cd /path/to/fork/src/testdir
make
------------------------------------------------------------
2) Examine the screendumps from the "failed" directory:
------------------------------------------------------------
../vim -u NONE -S viewdumps.vim
------------------------------------------------------------
============================================================
Reviewing UPLOADED failed screendump tests can be arranged
as follows (it can be further locally scripted):
1) Fetch an artifact with failed screendumps from
"github.com/vim/vim/actions/runs/A_ID/artifacts/B_ID".
2) Extract the archived files:
------------------------------------------------------------
unzip /tmp/failed-tests.zip -d /tmp
------------------------------------------------------------
3) Set up the "dumps" directory. Create a symlink to
"/path/to/fork/dirs/dumps" in the extracted directories so
that term_dumpdiff() can be used. (The lookup algorithm
resolves "dumps" for every loaded filename. So, with
"/tmp/src/testdir/failed/*.dump" files passed as script
arguments, the algorithm will make the files in
"/tmp/src/testdir/dumps" queried.)
------------------------------------------------------------
cd /path/to/fork
ln -s $(pwd)/src/testdir/dumps /tmp/src/testdir/dumps
------------------------------------------------------------
4) Examine the extracted screendumps:
------------------------------------------------------------
./src/vim -u NONE -S src/testdir/viewdumps.vim \
/tmp/src/testdir/failed/*.dump
------------------------------------------------------------
5) Clean up:
------------------------------------------------------------
unlink /tmp/src/testdir/dumps
rm -rf /tmp/src
------------------------------------------------------------
============================================================
Reviewing SUBMITTED FOR PULL REQUEST screendump tests can be
arranged as follows (it can be further locally scripted):
1) List the fetched changeset and write the changed "dumps"
filenames to "/tmp/filelist":
------------------------------------------------------------
cd /path/to/fork
git switch prs/1234
git diff-index --relative=src/testdir/dumps/ \
--name-only prs/1234~1 > /tmp/filelist
------------------------------------------------------------
2) Reconcile relative filepaths, and copy next-to-be-updated
"dumps" files in the "failed" directory (note the missing
new screendumps, if any):
------------------------------------------------------------
git switch master
cd src/testdir/dumps
test -d ../failed || mkdir ../failed
cp -t ../failed $(cat /tmp/filelist)
------------------------------------------------------------
3) Remember about the introduced INVERTED relation between
"dumps" and "failed", i.e. the files to be committed are in
"dumps" already and their previous versions are in "failed";
therefore, copy the missing new screendumps from "dumps" to
"failed" (otherwise these won't be shown):
------------------------------------------------------------
git switch prs/1234
cp -t ../failed foo_10.dump foo_11.dump foo_12.dump
------------------------------------------------------------
4) Examine the screendumps from the "failed" directory (new
screendumps will be shown with no difference between their
versions):
------------------------------------------------------------
cd ..
../vim -u NONE -S viewdumps.vim
------------------------------------------------------------
closes: #15515
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
With the submitted "viewdumps.vim" script, a few manual
steps in typical workflows (see below) can be automated.
The updated "README.txt" contains additional information.
============================================================
Reviewing LOCAL failed syntax tests can be arranged as
follows:
1) Run tests and generate screendumps:
------------------------------------------------------------
cd /path/to/fork/runtime/syntax
make clean test
------------------------------------------------------------
2) Examine the screendumps from the "failed" directory:
------------------------------------------------------------
../../src/vim --clean -S testdir/viewdumps.vim
------------------------------------------------------------
============================================================
Reviewing UPLOADED failed syntax tests can be arranged as
follows (it can be further locally scripted):
1) Fetch an artifact with failed screendumps from
"github.com/vim/vim/actions/runs/A_ID/artifacts/B_ID".
2) Extract the archived files:
------------------------------------------------------------
unzip /tmp/failed-tests.zip -d /tmp
------------------------------------------------------------
3) Set up the "dumps" directory. Create a symlink to
"/path/to/fork/dirs/dumps" in the extracted directories so
that term_dumpdiff() can be used. (The lookup algorithm
resolves "dumps" for every loaded filename. So, with
"/tmp/runtime/syntax/testdir/failed/*.dump" files passed
as script arguments, the algorithm will make the files in
"/tmp/runtime/syntax/testdir/dumps" queried.)
------------------------------------------------------------
cd /path/to/fork
ln -s $(pwd)/runtime/syntax/testdir/dumps \
/tmp/runtime/syntax/testdir/dumps
------------------------------------------------------------
4) Examine the extracted screendumps:
------------------------------------------------------------
./src/vim --clean -S runtime/syntax/testdir/viewdumps.vim \
/tmp/runtime/syntax/testdir/failed/*.dump
------------------------------------------------------------
5) Clean up:
------------------------------------------------------------
unlink /tmp/runtime/syntax/testdir/dumps
rm -rf /tmp/runtime
------------------------------------------------------------
============================================================
Reviewing SUBMITTED FOR PULL REQUEST syntax tests can be
arranged as follows (it can be further locally scripted):
1) List the fetched changeset and write the changed "dumps"
filenames to "/tmp/filelist":
------------------------------------------------------------
cd /path/to/fork
git switch prs/1234
git diff-index --relative=runtime/syntax/testdir/dumps/ \
--name-only prs/1234~1 > /tmp/filelist
------------------------------------------------------------
2) Reconcile relative filepaths, and copy next-to-be-updated
"dumps" files in the "failed" directory (note the missing
new screendumps, if any):
------------------------------------------------------------
git switch master
cd runtime/syntax/testdir/dumps
cp -t ../failed $(cat /tmp/filelist)
------------------------------------------------------------
3) Remember about the introduced INVERTED relation between
"dumps" and "failed", i.e. the files to be committed are in
"dumps" already and their previous versions are in "failed";
therefore, copy the missing new screendumps from "dumps" to
"failed" (otherwise these won't be shown):
------------------------------------------------------------
git switch prs/1234
cp -t ../failed foo_10.dump foo_11.dump foo_12.dump
------------------------------------------------------------
4) Examine the screendumps from the "failed" directory (new
screendumps will be shown with no difference between their
versions):
------------------------------------------------------------
cd ..
../../../src/vim --clean -S viewdumps.vim
------------------------------------------------------------
closes: #15476
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: the zip plugin is not tested.
Solution: include tests (Damien)
closes: #15411
Signed-off-by: Damien <141588647+xrandomname@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Write a batch of test files with made-up syntax to serve for
additional linewise checks to be manually performed whenever
the algorithm for screen dump file generation is modified.
Define a shell variable VIM_SYNTAX_SELF_TESTING to run these
tests:
cd runtime/syntax/
VIM_SYNTAX_SELF_TESTING=1 make clean test
related: #15150
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not possible to translate Vim script messages
(RestorerZ)
Solution: implement bindtextdomain() and gettext() to support Vim script
message translations (Christ van Willegen)
fixes: #11637closes: #12447
Signed-off-by: Christ van Willegen <cvwillegen@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: make errors trying to access autoload/zig
Solution: Remove autoload/zig from Makefile, adjust Filelist
(Derek Schrock)
Commit d1d9316c6 removed autoload/zig/ files and install/uninstall target
of the Makefile fail since the directory doesn't exist any longer.
closes: #14828
Signed-off-by: Derek Schrock <dereks@lifeofadishwasher.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: eval.c is too long
Solution: Move garbage collection code to new gc.c file
(Yegappan Lakshmanan)
closes: #14824
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
It's a bit of a pain to debug failing screendump tests without knowing
exactly what went wrong. Therefore include actions/upload-artifact for
the Github CI runners and have them uploaded those failing screen dump
tests automatically.
Let's add this step to each of the Linux/MacOS/Windows workflows but do
not duplicate the code, factor it out to a single file
.github/actions/screendump/action.yml and reference this one from the
main ci.yml file
Example:
https://github.com/chrisbra/vim/actions/runs/9085493619closes: #14771
Co-authored-by: dundargoc <gocdundar@gmail.com>
Co-authored-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Github is complaining about "This file has errors" and is just noisy
and for that reason does not ping maintainers if a new issue/PR is
created.
Let's just rename it to MAINTAINERS file instead and update the
documentation.
Signed-off-by: Christian Brabandt <cb@256bit.org>
* translation(ru): The main file README.txt and uganda.txt
* removed tags-ru
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
* NSIS: Possibility to include translated license and README.txt files
* fixed a missing semicolon
* Disable always show dialog choice language
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Also:
- Include a syntax test for Markdown that takes advantage of
a sourceable setup configuration.
- Update Filelist
closes: #14215
Signed-off-by: Aliaksei Budavei <0x000c70@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
fix degenerate splines in vimlogo.svg
closes: #13941
Signed-off-by: Shay Hill <shay_public@hotmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
- File coveralls.yml removed from $(SRC_ALL), in patch 9.0.1752 (#12851)
- runtime/lang/Make_mvc.mak moved from $(LANG_DOS) to $(RT_DOS)
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Sometimes patches add files that should be included in tarballs for
distribution, but are not added to Filelist (used by Makefile to build
the tar archive). This can break the build, or it can be silently
ignored as runtime files are simply not included in the distribution.
Add a CI check to ensure all files tracked in the repository are
assigned to a variable in Filelist. A few files were not listed because
they do not need to be included in builds and tarballs, so add an IGNORE
variable for these exceptions.
Co-authored-by: Peter Simonyi <pts@petersimonyi.ca>
Signed-off-by: Christian Brabandt <cb@256bit.org>
These files were discovered to be missing from Filelist, and thus
distribution tarballs:
- editorconfig plugin
- extra files for Rust support
- readme for Haiku OS builds
Co-authored-by: Peter Simonyi <pts@petersimonyi.ca>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: translation Makefiles can be improved
Solution: Modified and extended po-related Makefiles and
related files
closes: #13518
Signed-off-by: RestorerZ <restorer@mail2k.ru>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Tags for help files disappeared with the latest Vim update in Fedora,
which is caused by silent error (it didn't stop the build) about missing
file. I use 'make unixall' in Fedora to get the latest patchlevels and
the new files were missing from Filelist file which is used for
generating the tarball.
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Classes are not documented or implemented yet.
Solution: Make the first steps at documenting Vim9 objects, classes and
interfaces. Make initial choices for the syntax. Add a skeleton
implementation. Add "public" and "this" in the command table.
Problem: It is not easy to see what client-server commands are doing.
Solution: Add channel log messages if ch_log() is available. Move the
channel logging and make it available with the +eval feature.
Problem: Cannot easily try out what codes various keys produce.
Solution: Add a script to gather key code information, with an initial list
of codes to compare with.
Problem: Extra newline in messages after a verbose shell message.
Solution: Output the newline with msg_putchar_attr(). (closes#11233)
Make it possible to filter a screendump before comparing it.
Problem: The bitmaps/vim.ico file is not in the distribution.
Solution: Add it back to the distribution. Adjust the build rules to have
it end up in the right place.
